Under Bench Fridges: Front Venting, Sizes and Under Counter Fit

Under bench fridges are low, wide drinks fridges designed to sit beneath a bench, bar top or kitchen counter. You might see them called under bench fridges, under counter bar fridges, undercounter bar fridges or underbench bar fridges, and for a home bar or a built in kitchen they are the neat option, because the fridge disappears under the work surface while the drinks stay within reach. This guide uses the real specifications of the models we sell, so you can check heights, widths and venting before you buy. If you are searching for a bar fridge under counter, or an under counter fridge for sale, the models below are the ones to look at.

What makes a fridge an under bench fridge

Two things decide whether a fridge will work under a bench: its height and where it vents heat. In our catalogue, 42 fridges are listed for under bench or under counter use. They are 650 to 875 mm tall, 495 to 1,350 mm wide and 500 to 595 mm deep, and they hold from 89 up to 330 litres. They include glass door and solid stainless steel single door models, double and triple door models, and six dual zone wine and beverage fridges. Our bar fridge dimensions guide shows how these sizes compare with the rest of the range.

Front venting matters for under counter fridges

A fridge has to release heat. Front venting models blow heat out through the front, so they can sit between cabinets or under a bench with a closed back and sides. Rear venting models need open space around them, so they are not suited to being boxed in. In our range, 29 models are listed as front venting, all from Schmick, in sizes from 89 to 274 litres and priced from $997 to $1,997. Always check the ventilation clearance on the product page, and read our built in bar fridge guide before you build one in.

Single door under bench fridges

These are the most popular choice for a home bar. Four examples from the catalogue:

  • Schmick SK116R-HD: 121 litres, heated glass door, 495 x 570 x 800 mm, 39 dB, $1,097.
  • Schmick SK126R-HD: 132 litres, heated glass door, 495 x 586 x 840 mm, 38 dB, $1,197.
  • Schmick SK156R-HD: 164 litres, heated glass door, 595 x 586 x 840 mm, 39 dB, $1,327.
  • Schmick SK146R-SD: 164 litres, solid stainless steel door, 550 x 586 x 875 mm, 41 dB, $1,327.

The R and L in many model names mean the door hinge side, so pick the side that suits how you will reach into the fridge. Our stainless steel bar fridge guide covers the solid door models.

Double door under bench fridges

If one door is not enough, the double door models are still low enough to go under a bench. The Schmick SK245-HD is a front venting 274 litre two door model at 870 x 586 x 875 mm and $1,997, and the Rhino SG2H-B is a 208 litre commercial model at 900 x 500 x 840 mm and $1,877. See our double door bar fridge guide for the full range.

Under bench wine and beverage fridges

Six dual zone models in our under bench dual zone range keep wine and beer at two different temperatures. Our dual zone wine and beverage fridge guide explains how the zones work.

Noise, energy and climate

Under bench fridges often sit in living areas, so noise matters. Across the under bench models, sound ratings run from 38 to 45 dB, and the quietest are the front venting Schmick glass door models. Check the energy stars and the climate rating on each product page, and read our quiet bar fridge guide if the fridge will sit in an open plan room.

Under bench fridge prices

Under bench models range from $800 for the entry dual zone fridges up to $3,327 for the largest three door commercial models. The single door examples above sit between $1,097 and $1,327. The price on each product page is the price you pay, and shipping is free across Australia.

Fitting an under bench fridge

Measure the opening in three places, because benches and cabinets are not always square. Allow room for the door to open fully, and check that the shelves can still slide out if the fridge sits against a wall or a post. Plan the power point too: it should be within reach of the cord and, where you can, accessible without pulling the fridge out. Slide the fridge in gently, and keep the ventilation gap listed on the product page clear of insulation or storage. If you are unsure about a tight fit, send us the opening size and we will help you choose a model.

Under bench fridge checklist

  • Measure the opening: height, width and depth, then add the ventilation gap on the product page.
  • Choose a front venting model if the fridge will be boxed in by cabinets.
  • Choose the hinge side and the door type: heated glass or solid stainless steel.
  • Compare the sound rating if it sits in a living area.
  • Check the capacity against how many cans and bottles you want to store.

Under bench fridge questions

Can any bar fridge go under a bench?

No. The fridge must be low enough, and it must vent in a way that suits the space. A front venting model is the safe choice for a closed in cabinet, and a rear venting model needs open space around it.

What is the difference between an under bench fridge and an under counter fridge?

They are the same kind of fridge. Under bench, under counter and undercounter are different names for a low fridge that fits beneath a work surface.

Do under bench fridges have a warranty?

Yes. Our bar fridges list a 2 years parts and labour warranty on the product page.

How do I order an under bench fridge?

Add it to your cart and complete the order form. We confirm your order by email, and shipping is free across Australia. Paying with a cryptocurrency takes 10% off, explained in our crypto discount article, and bank transfer, PayID and Osko are available at the full price. Browse the single door range, or contact us if you need help choosing.

More guides